You are successfully logged out of your my randstad account

You have successfully deleted your account

Thank you for subscribing to your personalised job alerts.

21 jobs found for thermal welding in massachusetts

filter
    • billerica, massachusetts
    • permanent
    • $58,240 - $62,400 per year
    Randstad is currently assisting our client with their 1st shift Welder opening in Billerica MA! This is a DIRECT HIRE opportunity!  Job duties include but not limited to: - Mig/Tig Welding - Welding various steel and stainless steel weldments - GMAW and GTAW welding processes - Operate overhear & jib cranes, saws, grinders and equipment - .25 Inch measurements - Weld frames and fixtures Pay : $25-$30/HR Hours : 6:00am-2:30PM Benefits : Great company package If interested, please send resume to andiejane.phinney@randstadusa.comsalary: $58,240 - $62,400 per yearshift: Firstwork hours: 6 AM - 2:30 PMeducation: High` SchoolResponsibilitiesLaboratory equipment manufacturer, located in Billerica MA, currently seeking an experienced Mig/Tig welder to fabricate various steel and stainless steel weldments. Qualified candidate will work in a production manufacturing shop using GMAW and GTAW welding processes.SkillsMigTigSteeleGrindersWeldingQualificationsYears of experience: 0 yearsExperience level: ExperiencedRandstad is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Randstad. Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.EOEDisclaime For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    Randstad is currently assisting our client with their 1st shift Welder opening in Billerica MA! This is a DIRECT HIRE opportunity!  Job duties include but not limited to: - Mig/Tig Welding - Welding various steel and stainless steel weldments - GMAW and GTAW welding processes - Operate overhear & jib cranes, saws, grinders and equipment - .25 Inch measurements - Weld frames and fixtures Pay : $25-$30/HR Hours : 6:00am-2:30PM Benefits : Great company package If interested, please send resume to andiejane.phinney@randstadusa.comsalary: $58,240 - $62,400 per yearshift: Firstwork hours: 6 AM - 2:30 PMeducation: High` SchoolResponsibilitiesLaboratory equipment manufacturer, located in Billerica MA, currently seeking an experienced Mig/Tig welder to fabricate various steel and stainless steel weldments. Qualified candidate will work in a production manufacturing shop using GMAW and GTAW welding processes.SkillsMigTigSteeleGrindersWeldingQualificationsYears of experience: 0 yearsExperience level: ExperiencedRandstad is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Randstad. Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.EOEDisclaime For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    • danvers, massachusetts
    • permanent
    • $45,000 - $60,000 per year
    Our client is seeking a Machine Operator to manufacture plastic parts by operating the plastic injection molding press, inspecting the quality of the part produced, trimming and/or further assembling the part, packaging and documenting the parts. This is a full time/direct hire position with excellent pay and benefits!salary: $45,000 - $60,000 per yearshift: Firstwork hours: 8 AM - 4 PMeducation: High` SchoolResponsibilities Performs multiple tasks to accomplish the production of molded products, including the manual assembly operations. This position requires strict attention to inspection criteria, SOP’s, and production data to ensure the quality of the final products. This position will work with a variety of production equipment, measurement equipment, gauges, leak checkers, welders, vision system. This position requires the ability to work independently, make quality decisions concerning manufactured products, and produce parts at the expected production rate. Follows standard operating procedures for the entire process: molding, assembly, accessorizing. Performs all necessary quality control checks as well as continually checks product for defects. Maintains accurate production counts. Performs inventory of all products and components in area. Checks for proper materials to build product. Performs final QA with quality department for inspection. SkillsMath and Calculationmachine operationMoldingSettingQualificationsYears of experience: 1 yearExperience level: Entry LevelRandstad is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Randstad. Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.EOEDisclaime For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    Our client is seeking a Machine Operator to manufacture plastic parts by operating the plastic injection molding press, inspecting the quality of the part produced, trimming and/or further assembling the part, packaging and documenting the parts. This is a full time/direct hire position with excellent pay and benefits!salary: $45,000 - $60,000 per yearshift: Firstwork hours: 8 AM - 4 PMeducation: High` SchoolResponsibilities Performs multiple tasks to accomplish the production of molded products, including the manual assembly operations. This position requires strict attention to inspection criteria, SOP’s, and production data to ensure the quality of the final products. This position will work with a variety of production equipment, measurement equipment, gauges, leak checkers, welders, vision system. This position requires the ability to work independently, make quality decisions concerning manufactured products, and produce parts at the expected production rate. Follows standard operating procedures for the entire process: molding, assembly, accessorizing. Performs all necessary quality control checks as well as continually checks product for defects. Maintains accurate production counts. Performs inventory of all products and components in area. Checks for proper materials to build product. Performs final QA with quality department for inspection. SkillsMath and Calculationmachine operationMoldingSettingQualificationsYears of experience: 1 yearExperience level: Entry LevelRandstad is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Randstad. Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.EOEDisclaime For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    • cambridge, massachusetts
    • contract
    • $65 - $67 per hour
    job summary: Currently seeking a Sr. Mechanical Engineer to design, implement and document key components of medical devices, from initial concept through manufacturing and into commercialization. The ideal candidate will have BS in Mechanical Engineering anf at least 5 years of experience in the design of products and protoyping of medical devices.   location: Cambridge, Massachusetts job type: Contract salary: $65 - 67 per hour work hours: 8am to 4pm education: Bachelors   responsibilities: - Directly responsible for mechanical design and documentation of medical device product, including consideration of assembly procedure. - Work closely with outside component suppliers to ensure the form, fit and function of the components meet all mechanical requirements. - Provide mechanical specifications for the medical device from the required functional specifications. - Ensure all components and assemblies meet all appropriate medical device standards. - Work with manufacturing team to analyze the assembly procedure and improve the design for manufacturability and serviceability. - Provide redesigned mechanical components in view of design for manufacturability. - Work with engineers of other disciplines to define the mechanical specifications of the medical device and conduct system integration activities. - Conduct and document feasibility studies, tolerance analysis, thermal analysis, FEA and other appropriate tests on new and improved designs. - Lead and manage mechanical design verification activities for the medical device. - Produce production level assembly and part drawings for components and assemblies. - Create and manage the Bill of Materials (BOM) for components and assemblies in the medical device. - Evaluate and make recommendations for the selection of contract manufacturers for the medical device. - Provide documentation of inventions for patent applications. - Review alternative technology IP as it relates to the design process   qualifications: Experience level: ExperiencedMinimum 5 years of experienceEducation: Bachelors (required)  skills: Mechanical Design Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    job summary: Currently seeking a Sr. Mechanical Engineer to design, implement and document key components of medical devices, from initial concept through manufacturing and into commercialization. The ideal candidate will have BS in Mechanical Engineering anf at least 5 years of experience in the design of products and protoyping of medical devices.   location: Cambridge, Massachusetts job type: Contract salary: $65 - 67 per hour work hours: 8am to 4pm education: Bachelors   responsibilities: - Directly responsible for mechanical design and documentation of medical device product, including consideration of assembly procedure. - Work closely with outside component suppliers to ensure the form, fit and function of the components meet all mechanical requirements. - Provide mechanical specifications for the medical device from the required functional specifications. - Ensure all components and assemblies meet all appropriate medical device standards. - Work with manufacturing team to analyze the assembly procedure and improve the design for manufacturability and serviceability. - Provide redesigned mechanical components in view of design for manufacturability. - Work with engineers of other disciplines to define the mechanical specifications of the medical device and conduct system integration activities. - Conduct and document feasibility studies, tolerance analysis, thermal analysis, FEA and other appropriate tests on new and improved designs. - Lead and manage mechanical design verification activities for the medical device. - Produce production level assembly and part drawings for components and assemblies. - Create and manage the Bill of Materials (BOM) for components and assemblies in the medical device. - Evaluate and make recommendations for the selection of contract manufacturers for the medical device. - Provide documentation of inventions for patent applications. - Review alternative technology IP as it relates to the design process   qualifications: Experience level: ExperiencedMinimum 5 years of experienceEducation: Bachelors (required)  skills: Mechanical Design Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    • west boxford, massachusetts
    • permanent
    • $110,000 - $140,000 per year
    job summary: Job Summary Responsible to completely own the radiofrequency product along with new next generation RF products. Qualifications Education Bachelor's degree required Master's degree preferred Specific Area of Study: BSEE/MSEE Experience 8+ years relevant experience Specific Related Experience: Experience in medical device and RF technology Skills Understanding of analog circuitry, power electronics, and RF circuitry at frequencies of 0.1MHz-10MHz, 10W-500WExperience with Schematic capture software, OrCAD CaptureExperience with PCB Layout software, OrCAD PCB EditorRF Class D & E Amplifiers experience, buck, boost transformer drive topologiesExperience developing medical devices in an ISO and FDA regulated environment is preferred.Must be self-motivated, detail oriented, possess strong organizational and communication skills.Works well with others, is thorough and demonstrates good judgment.Takes responsibility for projects, requirements, and schedules.Inspire cooperation and success among the EE team.   location: WESTFORD, Massachusetts job type: Permanent salary: $110,000 - 140,000 per year work hours: 8am to 5pm education: Bachelors   responsibilities: Author and execute test protocols for the Radiofrequency family of products along with releasing these documents into our SAP PLM system.Improve existing products, providing technical assistance to engineering, manufacturing, and field support.Author technical documents to verify operation of systems design and product support of systems, sub-assemblies and circuit boardsWrite and release ECO'sResponsible for the component selection, electrical modifications and design verification at the PCB and system level.Work cross functionality with Ops and Service on day-to-day needsEmbody and deliver the "Exceptional Everyday"   qualifications: Experience level: ExperiencedMinimum 8 years of experienceEducation: Bachelors (required)  skills: RF DesignCircuit Board DesignComponent Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    job summary: Job Summary Responsible to completely own the radiofrequency product along with new next generation RF products. Qualifications Education Bachelor's degree required Master's degree preferred Specific Area of Study: BSEE/MSEE Experience 8+ years relevant experience Specific Related Experience: Experience in medical device and RF technology Skills Understanding of analog circuitry, power electronics, and RF circuitry at frequencies of 0.1MHz-10MHz, 10W-500WExperience with Schematic capture software, OrCAD CaptureExperience with PCB Layout software, OrCAD PCB EditorRF Class D & E Amplifiers experience, buck, boost transformer drive topologiesExperience developing medical devices in an ISO and FDA regulated environment is preferred.Must be self-motivated, detail oriented, possess strong organizational and communication skills.Works well with others, is thorough and demonstrates good judgment.Takes responsibility for projects, requirements, and schedules.Inspire cooperation and success among the EE team.   location: WESTFORD, Massachusetts job type: Permanent salary: $110,000 - 140,000 per year work hours: 8am to 5pm education: Bachelors   responsibilities: Author and execute test protocols for the Radiofrequency family of products along with releasing these documents into our SAP PLM system.Improve existing products, providing technical assistance to engineering, manufacturing, and field support.Author technical documents to verify operation of systems design and product support of systems, sub-assemblies and circuit boardsWrite and release ECO'sResponsible for the component selection, electrical modifications and design verification at the PCB and system level.Work cross functionality with Ops and Service on day-to-day needsEmbody and deliver the "Exceptional Everyday"   qualifications: Experience level: ExperiencedMinimum 8 years of experienceEducation: Bachelors (required)  skills: RF DesignCircuit Board DesignComponent Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    • springfield, massachusetts
    • permanent
    • $55,000 - $70,000 per year
    job summary: Permanent position: Immediate need for an Assistant Project Manager in the Springfield, MA area with a mechanical contracting company that specializes various commercial, institutional, life science and industrial projects. Candidates should have a BS in Engineering or Construction Management and some experience, however candidates that are purely entry level with a passion for mechanical systems, plumbing, piping, metal fabrication, HVAC and construction will be highly considered.   location: Springfield, Massachusetts job type: Permanent salary: $55,000 - 70,000 per year work hours: 8am to 5pm education: Bachelors   responsibilities: Working with the PMs on submittal documents, drawing reviews, coordinating with field personnel, lead times, design, etc.Working in the office coordination with design, fabrication, production, etc. Requirements for the Project Engineer BS in Engineering or Construction Management.0-5 years experience in construction, mechanical contracting, project engineering, engineering HVAC / plumbing systems, etc.Previous sheet metal fabrication, piping / plumbing or construction experience would be a huge plus. #LI-CR1   qualifications: Experience level: ExperiencedMinimum 2 years of experienceEducation: Bachelors  skills: Assistant Project ManagerConstructionJunior Project ManagerJr Project ManagerMEPConstructionConstruction Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    job summary: Permanent position: Immediate need for an Assistant Project Manager in the Springfield, MA area with a mechanical contracting company that specializes various commercial, institutional, life science and industrial projects. Candidates should have a BS in Engineering or Construction Management and some experience, however candidates that are purely entry level with a passion for mechanical systems, plumbing, piping, metal fabrication, HVAC and construction will be highly considered.   location: Springfield, Massachusetts job type: Permanent salary: $55,000 - 70,000 per year work hours: 8am to 5pm education: Bachelors   responsibilities: Working with the PMs on submittal documents, drawing reviews, coordinating with field personnel, lead times, design, etc.Working in the office coordination with design, fabrication, production, etc. Requirements for the Project Engineer BS in Engineering or Construction Management.0-5 years experience in construction, mechanical contracting, project engineering, engineering HVAC / plumbing systems, etc.Previous sheet metal fabrication, piping / plumbing or construction experience would be a huge plus. #LI-CR1   qualifications: Experience level: ExperiencedMinimum 2 years of experienceEducation: Bachelors  skills: Assistant Project ManagerConstructionJunior Project ManagerJr Project ManagerMEPConstructionConstruction Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    • west boxford, massachusetts
    • permanent
    • $65,000 - $95,000 per year
    job summary: Essential Duties and Responsibilities The incumbent may be asked to perform other function-related activities in addition to the below mentioned responsibilities as reasonably required by business needs. Education and experience combination:Associate's degree is equivalent to 18 months of experienceBachelor's degree is equivalent to three (3) years of experienceMaster's degree is equivalent to four (4) years of experienceSpecific Area of Study: Bachelor's degree in Electrical, Mechanical or Optical Engineering preferred Specific Related Experience: 5 + years of experience in quality, product development or process development within FDA and/or ISO 13485 regulated medical device setting, with hands on knowledge of regulations with minimum of three (3) years in quality is required. Experience in medical devices manufacturing; experience with software driven electro-mechanical medical devices highly preferred. ASQ Certified Quality Engineer (CQE) or Certified Quality Auditor (CQA) certification desired.Previous experience supporting capital equipment and sterile products Skills Ability to read, analyze and interpret international and national Quality standards.Ability to effectively communicate and present information to top management and auditors from various compliance agencies.Ability to communicate efficiently and effectively with all levels within Quality as well as cross functionally with departments such as Manufacturing, Engineering and Purchasing.Proficient in the areas of statistical principles and applications; qualitative and quantitative data analysis; DOE, Acceptance and Sampling; process improvement/optimization; gage R&R measuring systems; and system and product audit.Proficient in manufacturing and quality documentation developmentAbility to work independently or under minimal supervisionUnderstanding of manufacturing processes, challenges, and solutionsKnowledge of Microsoft Word and Microsoft ExcelWorking knowledge of statistical programs (Minitab or other statistical packages)Knowledge of ISO standards for Class II medical devices preferable (ISO 13485, 14971)Working knowledge of electronic quality management systems and/or manufacturing execution (ERP) systemsExceptional analytical, electronics and electromechanical aptitude, problem solving, and root-cause analysis skillsExcellent organizational skillsstrong written and verbal communication skills   location: WESTFORD, Massachusetts job type: Permanent salary: $65,000 - 95,000 per year work hours: 8am to 5pm education: Bachelors   responsibilities: Support the local QMS with QE support. Interpret quality data and non-conformances. Perform failure evaluations, determine root cause, and implement corrective action.For product assigned, work with Operations and Manufacturing Engineering on production process flow, PFMEA and Master Validation Plan.Work closely with contract manufacturers on product transfers and process validations, help define in line inspection points to improve product quality, author product quality plans as needed.Identify process improvements for responsible product lines to improve product quality.Work with suppliers and contract mfgs to drive root cause investigation and appropriate corrective actions.Own and manage individual CAPAs. Work with cross functional team to investigate root case and drive corrective actions.Support risk management activities. Able to update risk management files and draft Health Hazard Evaluations as needed.Support the MRB evaluation process. Represent QA on cross-function MRB committee.Initiate and/or participate in cross-functional teams to support department and company goals. Lead product quality related meetings; follow-up with team members for updates and actions; and distribute meeting minutes.Support Quality Control inspection group to ensure product quality is present at incoming, in-process, and at final inspection. Establish inspection procedures and provide guidance in inspection methodology. Provide technical oversight to the QC group.Prepare and update Quality Assurance documents and SOPs. Review and approve interdepartmental records, documents and SOPs to ensure conformance with the regulations and guidelines.Support internal and external audits with backroom or front room support as needed.Must be team player, willing to contribute and collaborate to drive departmental goalsEmbody and deliver the "Exceptional Everyday"   qualifications: Experience level: ExperiencedMinimum 5 years of experienceEducation: Bachelors  skills: QualityQuality Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    job summary: Essential Duties and Responsibilities The incumbent may be asked to perform other function-related activities in addition to the below mentioned responsibilities as reasonably required by business needs. Education and experience combination:Associate's degree is equivalent to 18 months of experienceBachelor's degree is equivalent to three (3) years of experienceMaster's degree is equivalent to four (4) years of experienceSpecific Area of Study: Bachelor's degree in Electrical, Mechanical or Optical Engineering preferred Specific Related Experience: 5 + years of experience in quality, product development or process development within FDA and/or ISO 13485 regulated medical device setting, with hands on knowledge of regulations with minimum of three (3) years in quality is required. Experience in medical devices manufacturing; experience with software driven electro-mechanical medical devices highly preferred. ASQ Certified Quality Engineer (CQE) or Certified Quality Auditor (CQA) certification desired.Previous experience supporting capital equipment and sterile products Skills Ability to read, analyze and interpret international and national Quality standards.Ability to effectively communicate and present information to top management and auditors from various compliance agencies.Ability to communicate efficiently and effectively with all levels within Quality as well as cross functionally with departments such as Manufacturing, Engineering and Purchasing.Proficient in the areas of statistical principles and applications; qualitative and quantitative data analysis; DOE, Acceptance and Sampling; process improvement/optimization; gage R&R measuring systems; and system and product audit.Proficient in manufacturing and quality documentation developmentAbility to work independently or under minimal supervisionUnderstanding of manufacturing processes, challenges, and solutionsKnowledge of Microsoft Word and Microsoft ExcelWorking knowledge of statistical programs (Minitab or other statistical packages)Knowledge of ISO standards for Class II medical devices preferable (ISO 13485, 14971)Working knowledge of electronic quality management systems and/or manufacturing execution (ERP) systemsExceptional analytical, electronics and electromechanical aptitude, problem solving, and root-cause analysis skillsExcellent organizational skillsstrong written and verbal communication skills   location: WESTFORD, Massachusetts job type: Permanent salary: $65,000 - 95,000 per year work hours: 8am to 5pm education: Bachelors   responsibilities: Support the local QMS with QE support. Interpret quality data and non-conformances. Perform failure evaluations, determine root cause, and implement corrective action.For product assigned, work with Operations and Manufacturing Engineering on production process flow, PFMEA and Master Validation Plan.Work closely with contract manufacturers on product transfers and process validations, help define in line inspection points to improve product quality, author product quality plans as needed.Identify process improvements for responsible product lines to improve product quality.Work with suppliers and contract mfgs to drive root cause investigation and appropriate corrective actions.Own and manage individual CAPAs. Work with cross functional team to investigate root case and drive corrective actions.Support risk management activities. Able to update risk management files and draft Health Hazard Evaluations as needed.Support the MRB evaluation process. Represent QA on cross-function MRB committee.Initiate and/or participate in cross-functional teams to support department and company goals. Lead product quality related meetings; follow-up with team members for updates and actions; and distribute meeting minutes.Support Quality Control inspection group to ensure product quality is present at incoming, in-process, and at final inspection. Establish inspection procedures and provide guidance in inspection methodology. Provide technical oversight to the QC group.Prepare and update Quality Assurance documents and SOPs. Review and approve interdepartmental records, documents and SOPs to ensure conformance with the regulations and guidelines.Support internal and external audits with backroom or front room support as needed.Must be team player, willing to contribute and collaborate to drive departmental goalsEmbody and deliver the "Exceptional Everyday"   qualifications: Experience level: ExperiencedMinimum 5 years of experienceEducation: Bachelors  skills: QualityQuality Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    • needham, massachusetts
    • temp to perm
    • $55 - $65 per hour
    job summary: Sr Electrical Engineer needed for immediate temp / possible direct opportunity just South of Boston, MA. The right person will focus on team management and embedded electronic design and product development for our ambitious product roadmap of vacuum & cleaning products. The successful candidate will have experience in analog and digital embedded design, power electronics, including both hardware (schematic capture and PCB layout) and firmware (C and ASM), preferably in consumer products or similar. This team member will participate in ideas on how to best use electronics to comply with marketing and engineering requirements and support overall development from conceptualization to implementation of new products. This engineer will be directly involved in the design and building of prototypes that will drive new products to expand and improve our costumer experience. BSEE along with 5+ years of directly related experience is required. Apply now for immediate consideration!   location: Needham Heights, Massachusetts job type: Contract salary: $55 - 65 per hour work hours: 8am to 4pm education: Bachelors   responsibilities: Contribute to project work directly through architecture, schematics and software design while supporting DVT/DQTP, EMC and compliance testing.Design and development of consumer product electronics from initial concept to on-going product support Collaborate with our global multi-disciplinary teams to define, design, build, and test our next generation products from initial conception to mass production with new ideas and out-of-the-box engineering solutions.Collaborate with other engineering disciplines and Product Marketing to provide initial cost estimates for EBOM, as well as final product implementation based upon thorough analysis of product requirements.Support fielded products and perform analysis of field-reported issues.Lead electronics hardware and software peer design reviews for your product area. Think critically about new product concepts, and asking the provocative questions necessary for positive changeGeneration of test protocols and test reportsDesign and build prototypes to test and validate new concepts or create new development toolsReviewing and interpreting test results providing feedback on product improvement solutions   qualifications: Experience level: ExperiencedMinimum 5 years of experienceEducation: Bachelors (required)  skills: New Product Development (10 years of experience is preferred)Consumer Goods (10 years of experience is preferred)Strong Communication Skills (10 years of experience is preferred)Electrical DesignElectrical EngineeringAC DC Power ElectronicsHeating Elements and Motors (5 years of experience is preferred)Embedded Controllers (5 years of experience is preferred)Lithium BatteryEmbedded Software DevelopmentWireless Comm Standards Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    job summary: Sr Electrical Engineer needed for immediate temp / possible direct opportunity just South of Boston, MA. The right person will focus on team management and embedded electronic design and product development for our ambitious product roadmap of vacuum & cleaning products. The successful candidate will have experience in analog and digital embedded design, power electronics, including both hardware (schematic capture and PCB layout) and firmware (C and ASM), preferably in consumer products or similar. This team member will participate in ideas on how to best use electronics to comply with marketing and engineering requirements and support overall development from conceptualization to implementation of new products. This engineer will be directly involved in the design and building of prototypes that will drive new products to expand and improve our costumer experience. BSEE along with 5+ years of directly related experience is required. Apply now for immediate consideration!   location: Needham Heights, Massachusetts job type: Contract salary: $55 - 65 per hour work hours: 8am to 4pm education: Bachelors   responsibilities: Contribute to project work directly through architecture, schematics and software design while supporting DVT/DQTP, EMC and compliance testing.Design and development of consumer product electronics from initial concept to on-going product support Collaborate with our global multi-disciplinary teams to define, design, build, and test our next generation products from initial conception to mass production with new ideas and out-of-the-box engineering solutions.Collaborate with other engineering disciplines and Product Marketing to provide initial cost estimates for EBOM, as well as final product implementation based upon thorough analysis of product requirements.Support fielded products and perform analysis of field-reported issues.Lead electronics hardware and software peer design reviews for your product area. Think critically about new product concepts, and asking the provocative questions necessary for positive changeGeneration of test protocols and test reportsDesign and build prototypes to test and validate new concepts or create new development toolsReviewing and interpreting test results providing feedback on product improvement solutions   qualifications: Experience level: ExperiencedMinimum 5 years of experienceEducation: Bachelors (required)  skills: New Product Development (10 years of experience is preferred)Consumer Goods (10 years of experience is preferred)Strong Communication Skills (10 years of experience is preferred)Electrical DesignElectrical EngineeringAC DC Power ElectronicsHeating Elements and Motors (5 years of experience is preferred)Embedded Controllers (5 years of experience is preferred)Lithium BatteryEmbedded Software DevelopmentWireless Comm Standards Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    • cambridge, massachusetts
    • contract
    • $65 - $67 per hour
    job summary: Electrical Engineer needed to assist with electrical system integration and verification for all or parts of electrical system of robotic medical devices. The ideal candidate will have a Bachelors degree in Electrical Engineering and at least 5 years of experience with hands on design of circuit boards and board layouts with medical devices.   location: Cambridge, Massachusetts job type: Contract salary: $65 - 67 per hour work hours: 8am to 4pm education: Bachelors   responsibilities: Leading electrical system integration and verification for all or parts of electrical system of robotic medical devices Directly responsible for electrical analysis, design, implementation, and verification of robotic medical devices that consists of electrical hardware design and data acquisition Requirements and risk management for electrical system of robotic medical devicesEnsure electrical design and documentation complies with medical safety and EMC/EMI standardsCreate documentation adhering to quality procedures, regulations, standards and industry best practices under Design ControlCreate and execute unit and integration test plans with other engineersPlanning and executing verification of medical devicesLeading/supporting the creation of product verification reportsLead board bring-up activities and work with other engineers to insure product functionalityWork effectively in cross-functional teams consisting of Research, Engineering, Usability, Operations, QA/RA, and MarketingWork closely with development teams in remote locations by interfacing with them as technical lead of electricalsystemProvide documentation of inventions for patent applications; review alternative technology as it relates to the inventionCoaches other team members in methods for developing good product definitions #LI-MT1   qualifications: Experience level: ExperiencedMinimum 5 years of experienceEducation: Bachelors (required)  skills: PCB Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    job summary: Electrical Engineer needed to assist with electrical system integration and verification for all or parts of electrical system of robotic medical devices. The ideal candidate will have a Bachelors degree in Electrical Engineering and at least 5 years of experience with hands on design of circuit boards and board layouts with medical devices.   location: Cambridge, Massachusetts job type: Contract salary: $65 - 67 per hour work hours: 8am to 4pm education: Bachelors   responsibilities: Leading electrical system integration and verification for all or parts of electrical system of robotic medical devices Directly responsible for electrical analysis, design, implementation, and verification of robotic medical devices that consists of electrical hardware design and data acquisition Requirements and risk management for electrical system of robotic medical devicesEnsure electrical design and documentation complies with medical safety and EMC/EMI standardsCreate documentation adhering to quality procedures, regulations, standards and industry best practices under Design ControlCreate and execute unit and integration test plans with other engineersPlanning and executing verification of medical devicesLeading/supporting the creation of product verification reportsLead board bring-up activities and work with other engineers to insure product functionalityWork effectively in cross-functional teams consisting of Research, Engineering, Usability, Operations, QA/RA, and MarketingWork closely with development teams in remote locations by interfacing with them as technical lead of electricalsystemProvide documentation of inventions for patent applications; review alternative technology as it relates to the inventionCoaches other team members in methods for developing good product definitions #LI-MT1   qualifications: Experience level: ExperiencedMinimum 5 years of experienceEducation: Bachelors (required)  skills: PCB Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Carefully review the job posting for details on vaccine/testing requirements or ask your Randstad representative for more information.
    • boston, massachusetts
    • permanent
    • $28 - $35 per year
    Randstad is seeking an experienced HVAC/Refrigeration Technician for a market-leading company within the retail, commercial, and industrial refrigeration, and HVAC industries. Position located in all Major cities in Boston This is a direct hire opportunity! Perks: -Opportunities available nationwide -Career growth (We promote within) -Healthcare package with 401k matching -Yearly performance appraisals -Dispatched directly from home, company vehicle provided, and gas cardsalary: $28 - $35 per yearshift: Firstwork hours: 8 AM - 4 PMeducation: High SchoolResponsibilitiesJob Description: The HVAC Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric moto